Krisow Performance Fluids Inc. is a leading innovator and supplier of high-performance lubricants and allied chemicals.
ANDEROL 3057M is a PAO/ester based compressor lubricant that was designed to provide long-term lubrication of both rotary-vane and oil-flooded screw compressors.
ANDEROL 3057M meets or exceeds DIN 51506 VDL , ISO 6743-3 L-DAJ.
ANDEROL 3000 range is available in the grades ISO VG 32, 46, 57, 68, 100 and 150
Fewer oil changes for reduced maintenance
Very good performance in conditions of high humidity
Resistance to oxidation with reduced compressor varnish and deposits
Greatly reduces fire and explosion hazard
Lower oil consumption
Longer service life and greater protection of compressor components
Reduces operating temperatures
The following seals, paints and plastics are recommended for use in contact with Anderol Company Synthetic Lubricants. Materials not recommended are also shown. For more information on other materials see our ‘Compatibility Guide’.
RECOMMENDED :Viton, High Nitrile Buna N, Teflon, Epoxy Paint, Oil-Resistant Alkyd, Nylon, Delrin, Celcon, PBT
NOT RECOMMENDED:Neoprene, SBR Rubber, Low Nitrile Buna N, Acrylic Paint, Lacquer, Polystrene, PVC, ABS
Recommended for use in compressors suchas:
Oil flooded rotary screw compressors
Oil flooded rotary vane compressors
ANDEROL 3057M Can be used for the compression of Air, Helium and hydrocarbon gasses containing fractions of acidic components such as H2S.
Especially recommended for railway Brake systems
Nominal operating range for Anderol 3057M is -20°C to 205°C.
Knorr Bremse
Sab Wabco
| PROPERTIES | TEST METHOD | ANDEROL 3057M |
|---|---|---|
| Appearance @ 20°C | visual | Clear Yellow Liquid |
| Viscosity @ 40°C, cSt | ASTM D-445 | 52.8 |
| Viscosity @ 100°C, cSt | ASTM D-445 | 8.0 |
| Viscosity Index | ASTM D-2270 | 121 |
| Density @ 15°C, kg/l | ASTM D-1298 | 0.869 |
| Total Acid Number, mg KOH/g | ASTM D-664 | 0.05 |
| Flash Point, COC, °C | ASTM D-92 | 266 |
| Pour Point, °C | ASTM D-97 | -54 |
| Demulsibility @ 54°C,min | ASTM D-1401 | 15 |
| Air Release, 50°C | ASTM D 3427 | 3 |
| Sulphated Ash Content | DIN 51575 | 0.018 |
| Four Ball Wear | ASTM D 4172 | 0.38 |
| Viscosity @-25°C,cSt | ASTM D-445 | 7355 |
| Evaporation loss, 100°C, 22 hrs,% | ASTM D-972 | 0.16 |
Krisow Performance Fluids Inc. is a leading innovator and supplier of high-performance lubricants and allied chemicals.
© Copyright Krisow 2024. All rights reserved.