:: Krisow Performance Fluids Inc. ::

ANDEROL® 497

ANDEROL 497 is an ISO 68 synthetic di-ester based compressor lubricant specifically designed to provide longterm lubrication in air and process gas compressors and vacuum pumps.

Anderol 497 is rated H2 for use in food processing plant applications.

ANDEROL 497 meets or exceeds the following specifications:

DIN 51506 VDL

ISO 6743-3 L-DAJ

ADVANTAGES / BENEFITS

ANDEROL synthetic lubricants are the only long-life synthetic lubricants with over 60 years of successful performance.

No metal additives to interfere with catalytic processes

Fewer oil changes

Increases maintenance intervals

Greatly reduces fire and explosion hazard

Separates water condensate rapidly

Lower oil consumption

Eliminates lacquering and deposits

Reduces energy consumption

COMPATIBILITY

The following seals, paints and plastics are recommended for use in contact with Anderol Synthetic Lubricants. Materials not recommended are also shown. For more information on other materials see our ‘Compatibility Guide’.

RECOMMENDED :

Viton, High Nitrile Buna N, Teflon, Epoxy Paint, Oil-Resistant Alkyd, Nylon, Delrin, Celcon, PBT

NOT RECOMMENDED:

Neoprene, SBR Rubber, Low Nitrile Buna N, Acrylic Paint, Lacquer, Polystrene, PVC, ABS

APPLICATION

Anderol 497 can be used for the lubrication of

Oil flooded rotary screw compressors

Oil flooded rotary vane compressors

Axial compressors

Centrifugal compressors & vacuum pumps

in the presence of following gases:

Air

Butadiene

Carbon Monoxide

Furnace (crack) gas

Carbon Dioxide (dry)

Ethylene

Helium

Hydrogen

Hydrogen Sulfide (dry)

Natural gas

Methane

Nitrogen

Propane

Synthesis Gas

Sulfur Hexafluoride

Nominal Operating Range -25°C to 210 °C

APPROVALS

ABAC

ALUP

Telstar

PROPERTIES	TEST METHOD	ANDEROL 497
Appearance @ 20°C	visual	Clear Yellow Liquid
Viscosity @ 40°C, cSt	ASTM D-445	70.8
Viscosity @ 100°C, cSt	ASTM D-445	7.7
Viscosity Index	ASTM D-2270	62
Density @ 15°C, kg/l	ASTM D-1298	0.951
Total Acid Number, mg KOH/g	ASTM D-664	0.05
Flash Point, °C	ASTM D-92	248
Pour Point, °C	ASTM D-97	-42
Demulsibility @ 54°C,min	ASTM D-1401	25