:: Krisow Performance Fluids Inc. ::

ANDEROL® 555

ANDEROL 555 is an ISO 100 synthetic diester based compressor lubricant specifically designed to provide longterm lubrication in air and process gas compressors.

ANDEROL 555 meets or exceeds the following specifications:

BAM Approval

DIN 51506

ADVANTAGES / BENEFITS

ANDEROL synthetic lubricants are the only long-life synthetic lubricants with over 60 years of successful performance.

No metal additives to interfere with catalytic processes

Fewer oil changes

Reduces compressor maintenance

Greatly reduces fire and explosion hazard

Separates water condensate rapidly

Lower oil consumption

Eliminates lacquering and deposits

Reduces energy consumption

COMPATIBILITY

The following seals, paints and plastics are recommended for use in contact with Anderol Synthetic Lubricants. Materials not recommended are also shown. For more information on other materials see our ‘Compatibility Guide’

RECOMMENDED :

Viton, High Nitrile Buna N, Teflon, Epoxy Paint, Oil-Resistant Alkyd, Nylon, Delrin, Celcon, PBT

NOT RECOMMENDED:

Neoprene, SBR Rubber, Low Nitrile Buna N, Acrylic Paint, Lacquer, Polystrene, PVC, ABS

APPLICATION

Cylinder and crankcase lubrication for reciprocating compressors, vane compressors and vacuum pumps for the following gases:

Air

Butadiene

Carbon Monoxide

Furnace (crack) gas

Carbon Dioxide (dry)

Ethylene

Helium

Hydrogen

Hydrogen Sulfide (dry)

Natural gas

Methane

Nitrogen

Propane

Synthesis Gas

Sulfur Hexafluoride

Nominal Operating Range -15°C to 210 °C

APPROVALS

ABAC

ALKIN

ALUP

BAG

Becker

Busch

Bosch (used by)

Compair

Deno Compressors

Gardner Denver/ Hamworthy

Instituto Iperbarico

Leybold

Matsubara

Nautilus

Sperre

Thomassen

Tanabe

Telstar

TEPRO

UOP

PROPERTIES	TEST METHOD	ANDEROL 555
Appearance @ 20°C	visual	Clear Yellow Liquid
Viscosity @ 40°C, cSt	ASTM D-445	93.5
Viscosity @ 100°C, cSt	ASTM D-445	9.1
Viscosity Index	ASTM D-2270	61
Density @ 15°C, kg/l	ASTM D-1298	0.957
Total Acid Number, mg KOH/g	ASTM D-664	0.05
Flash Point, °C	ASTM D-92	250
Pour Point, °C	ASTM D-97	-33
Demulsibility @ 82°C,min	ASTM D-1401	10
Evaporation,22 hrs @100°C,%	ASTM D-972	0.16